Category: Pool Cleaning

Pressure Side vs. Suction Cleaners for Your Pool

admin |

If you’re looking at the best options for a new pool cleaner, you’ll have plenty of choices to consider, among them pressure side and suction side cleaners.

A pressure cleaner uses the return water from a booster pump dedicated for this purpose to push the cleaner all around the pool. It features a bag on its top, inside of which the debris from the pool gets collected during the cleaning process.

A suction cleaner, meanwhile, uses the pool’s primary filtration pump to suck up debris in the area, which then gets returned to the pump basket.

Which of these two options is better for your needs with your pool? Let’s take a more in-depth look at each option so you can determine the pros and cons for yourself as you weigh your options of pressure side vs. suction cleaners in Los Angeles, CA.

Pressure side cleaners

First, it’s important to know that not every pool is going to be equipped with a dedicated booster pump or have the space to be able to add one. This means a pressure cleaner might not necessarily be an option for you in your search, as most pressure cleaners are going to require you to have a dedicated booster pump capable of operating the cleaner. If your system does not have the plumbing for a pressure side cleaner, you can eliminate this option right off the bat.

A pressure cleaner does not power blast the surface of the pool—that’s not what the “pressure” in the name applies (you’re probably thinking of pressure washers). Instead, it uses the return water of the pool, which creates a suction vortex that pulls debris up and out from the pool into the cleaner’s attached bag. The jet stream and suction are created in part by that booster pump.

This type of cleaner is ideal for larger, heavier debris, because it has a wider throat design. This allows for larger clumps of debris, such as twigs, acorns and leaves, to be sucked into the bag without you having to worry about the potential for clogging.

Suction cleaners

A suction cleaner is going to be an option for a wider variety of pool owners, because it uses the main filtration pump to suck up debris rather than a dedicated booster pump. After sucking up the debris, it gets returned to the pump basket for disposal.

Suction cleaners can be susceptible to low flow issues, so if you have a smaller horsepower filter (below three quarters) you may need to contact your manufacturer to determine if using a suction cleaner is a possibility.

Suction cleaners essentially work like vacuum cleaners that run off the main pool pump’s suction ability. The hose for the cleaner gets connected to a dedicated suction line, or directly to the pool skimmer. The cleaner is powered by a turbine spun by the suction force from the pump. This is an ideal cleaner for a screened-in pool or a pool that gets a lot of sand and dirt in it.

If you’re trying to choose between pressure side vs. suction cleaners in Los Angeles, CA or would like more information about these types of cleaners, contact Avanti Pools, Inc. today.

Robotic Cleaners vs. In-Floor Cleaners: What You Should Know

admin |

Are you trying to decide whether you’ll purchase a robotic cleaner or an in-floor cleaner for your pool? Let’s take a closer look at some of the factors you’ll want to consider and the ways these two types of systems differ in those regards.

Cost

One of the first factors you’re most likely to look for when looking at robotic cleaners vs. in-floor cleaners in Los Angeles, CA is how much you can expect to pay for the system. Obviously, this isn’t the only factor you’re going to want to consider, but it’s important to at least keep this in mind if you’re working with a tight budget.

In most cases, randomized, robotic pool cleaners are going to cost you less than an in-floor cleaner, at least in terms of the initial investment, because they require significantly less labor in the construction phase of the pool. However, the longer you have your pool, the more the numbers will even out, because you’ll need to replace your robotic pool cleaners much more frequently than you would an in-floor cleaning system.

Performance

More important than the cost you pay for the machine is the performance you can expect to get from it. Specifically, which of these types of cleaners is going to be better at clearing large debris?

This one really depends on the pool. Many robotic pool cleaners work as sort of randomized vacuum cleaners that suck up large debris if they happen to run over it—otherwise, they won’t necessarily pick it up. In-floor cleaners are much more like large broom systems, which will sweep every inch of the pool, but might have a hard time getting the larger pieces of debris unless they also have add-on features, such as debris removal drains.

Cleaning coverage

Which of these two types of cleaning systems is going to cover more of your pool? We already sort of covered this above, but you’ll generally get better coverage out of in-floor cleaners, because they’re not randomized in the same way as robotic cleaners, which use a randomized cleaning pattern to roam your pool and pick up debris.

In-floor cleaners will be customized for every pool in which they’re installed, so they cover every square inch of the pool with great efficiency. Robotic cleaners will get the whole pool if you let them run long enough, but remember that they’re cleaning in a random pattern, so it’s not going to be as efficient if total coverage is your primary goal.

These are just a few of the primary considerations to keep in mind when you’re looking at robotic cleaners vs. in-floor cleaners in Los Angeles, CA for your pool. If you’re interested in learning more about these technologies and the various advantages and disadvantages associated with them, we encourage you to contact the team at Avanti Pools, Inc. and we will be happy to provide you with more information and answer any questions you have for our pool professionals. We look forward to working with you and delivering you high-quality pool maintenance solutions!

Advice from a Swimming Pool Contractor in Los Angeles, CA: Four Fall Pool Maintenance Tips

admin |

Fall is prime time for leaves to begin changing color and falling off trees. As pretty as this season is, it can cause a real mess in and around your backyard swimming pool, which is made worse when strong winds are present. But never fear—from pool maintenance to pool damage, here are four fall pool maintenance tips from a local swimming pool contractor in Los Angeles, CA:

For information on custom swimming pool construction, call Avanti Pools, Inc. to speak with a professional pool contractor in Los Angeles, CA today.

Ask Your Pool Designer in Los Angeles, CA About a Paramount Pool and Spa Cleaning System

admin |

When it comes to choosing different special features for your new pool, it can be easy to get overwhelmed by all the different options. But a few special features manage to outshine the rest, and we here at Avanti Pools, Inc. are proud to supply those kinds of top-notch special pool features.

For example, the Paramount Pool and Spa Cleaning System is especially popular with our clients, and makes for a more convenient, enjoyable and environmentally friendly pool experience. Here is some more information about why you should talk to your pool designer in Los Angeles, CA about installing a Paramount system in your new pool:

If you would like to learn more about the convenient, environmentally friendly self-cleaning systems available through Paramount Pool and Spa, please feel free to contact Avanti Pools, Inc. for more information.